Kiln

Description
Rotary kilns are used to heat solids to the point where a required chemical reaction(s)takes place. The rotary kiln is basically a rotating inclined cylinder. Solids retention time in the kiln is an important design factor and is set by proper selection of the diameter, length, speed, slope and internals design. There are two basic types of rotary kilns; direct fired and indirect fired. A direct fIred rotary kiln heats material by passing the combustion gases through the rotary kiln. The combustion can either occur in a combustion chamber if direct flame radiation is to be avoided or the flame can be directed down the length of the rotary kiln.
   

Supporting Roller

 
Description  
Gujarat Engineers has been able to manufacture and supply a comprehensive range of Kiln Support Rollers. These Kiln Support Rollers are designed by an experienced team of professionals, who have vast industrial knowledge that is used for the manufacturing of these kilns. We use high grade raw material for the manufacturing of these kilns that is known for low degradation.
Features:
Durability, Flawlessness,Premium quality.
Specifications:
Used in storage ton containers and on line ton containers, Available in 100 Kg to 900 Kgs, By installing these rollers supports in Chlorine ton containers rooms, chlorine valve gets easy to operate, Available with remote type to easy to handle the chlorine ton containers
 
 
     

Girth Gear

 
Description  
Girth gears are manufactured from segments.A girth gear is divided into 8–16 segments,which are joined by bolts. The segment length typically varies between 0.8–1.6 m. Short segments enable the use of small versatile and accurate machines. Due to this, optimal and precise tooth reliefs can be produced. Casting of short segments is easy, securing high and even material strength properties. Segments are interchangeable, which reduces spare part costs. Short segments also enable easy and cost-efficient transportation.  
 
   

Tyring Assemble

 
Description  
Rotary kiln tyre closeup showing typical chair arrangement Tyres, sometimes called riding rings, usually consist of a single annular rotary kiln steel casting, machined to a smooth cylindrical surface, which attach loosely to the rotary kiln shell through a variety of "chair" arrangements.These require some ingenuity of rotary kiln design, since the tyre must fit the shell snugly, but also allow thermal movement. The rotary kiln tyre rides on pairs of steel rollers, also machined to a smooth cylindrical surface, and set about half a rotary kiln-diameter apart. The rollers must support the rotary kiln, and allow rotation that is as nearly frictionless as possible. A well-engineered rotary kiln,when the power is cut off, will swing pendulum-like many times before coming to rest. The mass of a typical 6 x 60 m rotary kiln, including refractories and feed, is around 1100 tonnes, and would be carried on three tyres and sets of rotary kiln rollers, spaced along the length of the rotary kiln.The longest rotary kiln may have 8 sets of rollers, while very short rotary kiln may have only two.rotary kiln usually rotate at 0.5 to 2 rpm, but sometimes as fast as 5 rpm. The rotary kiln of most modern cement plants are running at 4 to 5 rpm. The bearings of the rotary kiln rollers must be capable of withstanding the large static and live loads involved, and must be carefully protected from the heat of the rotary kiln and the ingress of dust. In addition to support rotary kiln rollers, there are usually upper and lower "retaining rollers" bearing against the side of tyres, that prevent the rotary kiln from slipping off the support rollers.  
 
 

Thrust Roller

 
Description  
Gujarat Engineers is one of the most distinguished names in the industry engaged in manufacturing supplying a comprehensive range of Thrust Rollers. Our range is available in different dimensions and grades suiting best with the demands and requirements of our valued clients. These Thrust Rollers are widely appreciated by the clients for their high tensile strength, durability and many other features. We have reasonably priced our range.
Features:
Corrosion resistance, Accurate dimensions, Fine finish, High tensile strength.